21700/18650/3270/4680 Aluminum Cooling Plate for Big Battery Cells
A cooling plate for big battery cells, such as the 21700, 18650, 3270, and 4680 formats, is a specialized component designed to dissipate heat generated during the operation of these cells. The cooling pipe refer to the dimensions and specifications of cylindrical lithium-ion battery cells commonly used in various applications, including electric vehicles (EVs), energy storage systems, and consumer electronics.
| Product name | Snake tube for EV |
| Tube size | According to your boundary size 55*3mm for 21700 / 65*3.5mm for 4680 |
| Type of cells | 18650, 21700, 32700, 4680 battery cells |
| Structures | Extrusion aluminum tube + Inlet & outlet+quick connector |
| Length | According to your design |
| Surface treatment | Insulation coated / Powder spary / Bare |
| Related products | Quick connector, thermal interface material (silicon pad), pump, etc. |
| Services | Cooling tube design, thermal simulation, flow path design, finalize production feasibility |
Our Advantages:
1) Tooling development - we do it in house, so we can make initial prompt and accurate.
2) Design service, we have R&D department, can do design finalization, flow and heat simulation.
3) One station service - Thermal Interface Material, such as thermal silicone pad, Insulation coating etc.
Detail Products
Chemical composition
| Alloy | Si | Fe | Cu | Mn | Mg | Cr | Zn | V | Ti |
| 1050 | ≤0.25 | ≤0.40 | ≤0.05 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.05 | ≤0.03 |
| 1100 | ≤0.95(Si+Fe) | | 0.05~0.20 | ≤0.05 | -- | -- | ≤0.10 | --- | --- |
| 3102 | ≤0.40 | ≤0.70 | ≤0.1 | 0.05~0.4 | --- | --- | ≤0.3 | --- | ≤0.10 |
It can be customized according to customers' request!
Mechanical Properties
| Alloy | Temper | Tensile Strength | Yeild Strength | Elongation |
| 1050 | O/F/H111/H112 | ≥65MPa | ≥200MPa | ≥25% |
| 1100 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3102 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
| 3003 | O/F/H111/H112 | ≥75MPa | ≥200MPa | ≥25% |
Q: What is your terms of payment ?
A: Normally 30% TT in advance, balance paid before shipment.
Q: How long does it take for samples and mass production?
A: Usually it will take 15-20 days for new moulds and free samples (within 5kg), after confirmation, 25-30 days for mass production.
Q: OEM/ODM available?
A: Yes,we can!
Q: Can you assist in design?
A: Yes, we can! We have a strong and experienced design team.
Q: Could you provide sample?
A: Yes, We are honored to offer you samples for quality check.
Q: Is sample order accepted?
A: Yes,we accept sample order and we can provide design service!
Product Tags:
|
|
4695 High Heat Dissipation Aluminum Cooling Pipe for Big Battery Cells Images
|
